5 Major Types of Sewer Pipes

plumberartarmon concrete-pipes

There are types of pipes that can be used for various purposes. On the other hand, one thing that we need whatever type it may be is the quality of the pipe that will result to its longer service lifespan. The quality of the pipe dictates the pipes prices and also how strong they are to resist various factors that could damage the operation and the physical structure of the pipe. With that being said, it’s important for us to learn these types so that when we need to replace our pipes, then we know already there functions and features.

Reinforced and Non-reinforced Concrete Pipe

These type of pipe and the latter shares one characteristic and that is these pipes resist  heavy loads and stress. However, upon the installation procedure, contractors should be careful and give its full attention to every bit of detail in the process. A small amount of mistake committed to placing the pipe instantly cause cracks and leaks to occur which results in the pipe efficiency when operating. This pipe is composed of a rubber gasket and a spigot in order to achieve better connection to the next pipe at the same time averting leaks and waste water from seeping out of the pipe. For concrete pipes, it’s commonly lined either with an epoxy lining or a coal tar to protect the pipe against chemical reactions and other factors that result to corrosion.  

Asbestos-Cement Pipe

Most of the time, the reason why asbestos cement pipe is widely used is because of its resistance to corrosion and deterioration which is considered to be suitable for sewage system and supply mains. However, the downside is that this kind of pipe is vulnerable chemical such as hydrogen sulphide most especially if it’s combined even with the smallest amount of moisture that results to a more dangerous substance like sulphuric acid.

Reinforced Fibreglass Pipe

When it comes to the waste water system, reinforced fibreglass is the most reliable pipe among others. The pipe has the ability to bend slightly without breaking its body. Aside from that, it can resist any corrosive substance. Thus, it’s the perfect type of pipe for your sewer system.

Vitrified Clay Pipe

Similar to other types of pipe, vitrified clay pipe can also protect itself from the harmful effects of corrosion and other chemical reactions from wastes and other solutions flowing within the pipe system. The pipe is made up of spigots and mortar-sealed bell for a strong and easy connection to the pip next to it. However, the pipe is not resistant to tree roots that penetrate within the pipe. Most of the time, vitrified clay pipe fails to function because the roots are attracted to the porous surface of the pipe.

Cast and Ductile Iron Pipe

These pipes are commonly recommended by experts because they are suitable for underground sewers that carry the weight and stress of transportation vehicles and other heavy loads. This is because the cast and ductile iron pipes can withstand the pressure that these heavy loads give to the ground. As mentioned earlier, these are used for sewer lines that can be found in bridge crossing and other areas that are predicted to constantly experience heavy traffic. On the other hand, the setback of these pipes lies in its start-up cost.