3 Easy Solutions for Leaky Pipes

plumberartarmon leaky pipes

When a leaky pipe is overlooked, the problem will surely exacerbate. Severe water wastage occurs resulting in an increase in the water bill. In addition, expect that the area where the leaky pipe is will be an in complete disaster. A leaky pipe is one of the most common plumbing issues which are easy to repair. Moreover, there are several ways and tools on how to do it. However, some of these methods are only for a temporary solution. That’s why after putting a temporary aid to the problem, it is best to come up with a permanent solution so that the problem wouldn’t happen again.

  1. Opt for hose clamp

Typically, for some who aren’t experienced when it comes to D-I-Y leaky pipes, they call a local plumber. However, for experienced ones, they find it easy to mend the problem. The initial step in repairing a leaky tap is to purchase a rubber patch in the local store. Cover the rubber clamp and hold it in place by using an automotive clamp. Place the rubber patch on top of the leaky area and wrap it tightly. Afterward, use a screw in tightening other parts. Keep in mind that before tightening the parts, ensure that the rubber patch and the clamp are perfectly aligned. The two must be secured directly above the leaky spot. On the other hand, this method has also its setback. This method only serves a temporary solution. If there’s no other choice, better replace it with a new one.

  1. Utilise an epoxy paste

If you notice a leak in one of your pipes, it’s best to search the source of the leak first. Typically, pipe leaks can be found in the pipe’s fittings. The normal way to fix the problem is by using a c-clamp. However, it’s proven that clamping or just simply taping that pipe doesn’t really repair the problem. Experts also suggest using an epoxy paste for leaks found in the fittings. Also, do not forget to activate the shut-off valve before starting the repair operation. Then, flatten the epoxy paste using the palm of your hands and apply it on the leaky part. In addition, homeowners can use their thumb or a putty knife to put a paste between the pipes and the fittings. After doing this, leave the paste for at least 20 minutes for it to dry.

  1. Taping the pipe

Taping the pipes is an effective solution for cracks and leaks found in the pipe. However, like any leaky pipe problem, it’s important to locate the source of the leak first and activate the shut-off valve. With the use of a clean rug, wipe the pipe and start taping in the pipe. Typically, an electrical tape is used in this process. The pipe should be wrapped with the tape for at least 6 inches. This is a way to ensure that the tape won’t peel off easily. However, this is only a temporary solution as we do not know how long the tape would last.